Attach battery pack
Remove backing paper from Velcro strips
and stick Velcro to back of router and to
back of battery pack as shown. Press the
Velcro together to attach battery pack to
router. The Velcro allows the battery pack
to be easily removed and reattached.
Clip connectors together
Clip battery pack and laser electrical
connectors together to complete installation.
Test laser and positioning
Slide switch on battery back to “on” to test
laser operation. Note that the laser projects
a bright cross hair. Since the cross hair
remains stationary relative to router and bit
it can be used to accurately position the
router or work piece for joinery operations.
To adjust position of the cross hair, loosen
upper knob and rotate laser holder or loosen
lower knob and slide bracket in t-slot. The
t-slot stops allow you to set a position and
quickly return to it. See our techniques for
using laser guide for cutting box joints,
tenons, mortises, dados and dowel joints.
Since the laser light is very bright the target
work piece should also be well lit.
Caution – never stare directly into laser lens.
2
