Mark positions of dowels
Layout dowel positions on boards to be
jointed.
Clamp board to machine
With layout marks on top, clamp board to be
jointed onto sliding bar flush with underside
of base plate.
Position for dowel hole
Loosen star knob to free router movement.
Power feed board and position router so that
center of cross hair is positioned on location
for dowel. Tighten star knob.
Set plunge depth
Zero bit on top of board. Use brass gauge
bars to set router depth stop to desired
depth for the dowel.
It helps to have removed turret from depth
stop mechanism.
2
