Craftsman CMXGZAM241032, Руководство по сборке

Страница: 6 / 24

11. Your clamps can be partially pre-assembled.
The clamp assembly that mounts to your unit may be
oriented horizontally or vertically.
The preferred orientation of the clamp assembly is to have the saddles
perpendicular to one another. Thread the small bolt P into the center of
K and L assemblies, finger-tight. Slide smaller tube, L, into larger tube, K.
12. To determine the general location and direction for the crossbar (J), have
an assistant hold the cab at the desired location over the unit.
NOTE
: Depending on your unit, the crossbar may be
positioned facing forward or backward, and above
or below any linkage.
13. Notice how crossbar will sit in clamp assemblies once clamps are mounted
on unit.
NOTE : If the controls on your snow blower require more space for proper
operation, flip bar J.
14. Holding crossbar (J) in desired location, select area to mount K and L clamp
assemblies. See Fig. 12.
NOTE : Brute
®
and John Deere
®
units may require you to mount to the
horizontal handlebars on the unit.
NOTE
: Preferred position is on the vertical portion of the unit’s upper
handlebars.
OR
Lower Handle Bars
(Horizontal Tube Mount)
Upper Handle Bars
(Vertical Tube Mount)
Upper Vertical
Handle Bars
Lower Horizontal
Handle Bar
L
L
L
J
J
L
K
K
K
K
L
P
L
K
K
Forward
Facing
Backward
Facing
Crossbar (J)
OR
OR
6