Craftsman CMXGZAM241032, Руководство по сборке

Страница: 4 / 24

4
4. Insert poles G, narrow end up, into A end of both A/B assemblies. Insert set
screw (S) into top of bars A, securing in finger-tight.
Front
Back
5. Place curved bar C on flat surface, nuts facing up.
Insert the labeled end of curved bar D into C (making sure arrows meet).
Repeat with the other bar D on the opposite end of bar C. Insert set screw
(S) into ends of bars C, securing in finger-tight.
7. Make sure cab frame is in the shape of a box, with right angles (90°). Then
tighten all the set screws (S), except the set screws (S) on the crossbar
(J), using the enclosed Allen wrench.
CAUTION
: Do not over tighten the set screws.
6. Place assembly D/C/D onto ends of poles G. Insert
set screw (S) at top of poles G, securing in finger-tight.
B
D
D
D
E
D
G
J
G
G
S
S
F
C
C
F
F
B
B
A
G
A
B
F
Front
Back
90º
90º