background image

English

18

Register Online

Thank you for your purchase. Register your product now for:

•  WARRAnTY sERViCE: 

Registering your product will 

help you obtain more efficient warranty service in case 
there is a problem with your product.

•  COnFiRMATiOn OF OWnERshiP:

 In case of an 

insurance loss, such as fire, flood or theft, your 
registration of ownership will serve as your proof of 
purchase.

•  FOR YOUR sAFETY: 

Registering your product will 

allow us to contact you in the unlikely event a safety 
notification is required under the Federal Consumer 
Safety Act.

Register online at 

www.craftsman.com/registration

Three Year Limited Warranty

CRAFTSMAN will repair or replace, without charge, any 
defects due to faulty materials or workmanship for one year 
from the date of purchase. This warranty does not cover 
part failure due to normal wear or tool abuse. For further 
detail of warranty coverage and warranty repair information, 
visit

 www.craftsman.com

 or call 

1-888-331-4569

. This 

warranty does not apply to accessories or damage caused 
where repairs have been made or attempted by others. 
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, 
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY 
AND FITNESS FOR A PARTICULAR PURPOSE, AND EXCLUDES 
ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some 
states do not allow limitations on how long an implied 
warranty lasts or the exclusion or limitation of incidental 
or consequential damages, so these limitations may not 
apply to you. This warranty gives you specific legal rights 
and you may have other rights which vary in certain states 
or provinces.

90 DAY MOnEY BACK gUARAnTEE

If you are not completely satisfied with the performance of 
your CRAFTSMAN Power Tool, Laser, or Nailer for any reason, 
you can return it within 90 days from the date of purchase 
with a receipt for a full refund – no questions asked.

lATin AMERiCA: 

This warranty does not apply to products 

sold in Latin America. For products sold in Latin America, 
see country specific warranty information contained either 
in the packaging, call the local company or see website for 
warranty information.

Содержание CMXEDAR300





















Отзывы: