7 - ENG
D23377
ASSEMBLY
Tools Required for Assembly
1 - 9/16” socket or open end wrench
1 - 3/8” socket or open end wrench
GLOSSARY
Become familiar with these terms before operating the
unit.
CFM
: Cubic feet per minute.
SCFM:
Standard cubic feet per minute; a unit of
measure of air delivery.
PSIG:
Pounds per square inch gauge; a unit of meas-
ure of pressure.
ASME:
American Society of Mechanical Engineers;
made, tested, inspected and registered to meet the
standards of the ASME.
Code Certification:
Products that bear one or more
of the following marks: UL, CUL, ETL, CETL, have
been evaluated by OSHA certified independent safety
laboratories and meet the applicable Underwriters
Laboratories Standards for Safety.
Cut-In Pressure:
While the motor is off, air tank
pressure drops as you continue to use your accesso-
ry. When the tank pressure drops to the factory set
low pressure the motor will restart automatically. The
low pressure at which the motor automatically restarts
is called “cut-in” pressure.
Cut-Out Pressure:
When an air compressor is
turned on and begins to run, air pressure in the air
tank begins to build. It builds to a factory set high
pressure before the motor automatically shuts off -
protecting your air tank from pressure higher than its
capacity. The high pressure at which the motor shuts
off is called “cut-out” pressure.
Branch Circuit:
Circuit carrying electricity from elec-
trical panel to outlet.
ACCESSORIES
This unit is capable of powering the following Accessories. The accessories are available through the current
Power and Hand Tool Catalog or full-line Sears stores.
Accessories
•
In Line Filter
•
Tire Air Chuck
•
Quick Connector Sets
(various sizes)
•
Air Pressure Regulators
•
Oil Fog Lubricators
•
Air Hose:
1/4", 3/8" or 1/2" I.D.
in various lengths
Specialty Tools
•
Inflating/Blow Gun
•
Grease Gun
•
Caulk Gun
•
Engine Cleaner
•
Sand Blaster
Carpentry Tools
•
Finishing Nailer / Stapler
•
Construction Nailer /
Stapler
Socket Driving
•
1" Impact Wrench
•
3/4" Impact Wrench
•
1/2" Impact Wrench
•
3/8" Impact/Butterfly
Wrench
•
1/2" Ratchet
•
3/8" Ratchet
•
1/4" Ratchet
Material Shaping
•
2.625" Hammer
•
1.625" Hammer
•
1/2" Drill
•
3/8" Drill
•
High Speed Rotary
•
Mini High Speed Rotary
•
Cut-Off Tool
•
Shear
•
4" Angle Grinder
•
Reciprocating Saw
•
Nibbler
Spray Painting
•
Multi-Purpose Spray
Gun
•
Automotive Spray Gun
•
HVLP Spray Gun
Finishing/Sanding
•
High Speed Sander
•
Random Orbit Sander
•
6" DA Sander
•
Jitterbug Sander
•
Straight Line Sander
Contents of Carton
1 - Air Compressor
1 - Handle
4 - Self Tapping Screws
2 - Wheels
2 - Shoulder Bolts, 3/8-16
2 - Hex Nuts, 3/8-16
1 - Rubber Strip
