Craftsman 919.15216, Руководство пользователя

Страница: 18 / 26

18 - ENG
N014212
PrOBLeM CAUSE COrreCTiON
Pressure reading on
the regulated pressure
gauge drops when an
accessory is used.
It is normal for "some"
pressure drop to occur.
If there is an excessive
amount of pressure drop
when the accessory
is used, adjust the
regulator following
the instructions in
the
Description of
Operation paragraph in
the
Operation
Section.
NOTE: Adjust the
regulated pressure under
flow conditions (while
accessory is being
used).
Compressor is not sup-
plying enough air to
operate accessories.
Prolonged excessive use
of air.
Decrease amount of air
usage.
Compressor is not large
enough for air require-
ment.
Check the accessory
air requirement. If it is
higher than the SCFM
or pressure supplied
by your air compressor,
you need a larger
compressor.
Hole in hose. Check and replace if
required.
Check valve restricted. Remove and clean, or
replace.
Air leaks. Tighten fittings.
Regulator knob has con-
tinuous air leak.
Damaged regulator. Replace.