background image

WARNINGS

Always use the stabilizer bar provided when using tractor lift. 

Make sure stabilizer bar is properly in place before starting any 

work on tractor. 

Read and understand all safety and operating instructions

before using the tractor lift. 

Never

 allow anyone unfamiliar

with these instructions to use the tractor lift.

Read and understand all safety and operating instructions

provided by the tractor's manufacturer before using tractor lift.

Never

 lay under the tractor or mowing deck.

When using lift, keep all bystanders, including children, away.

This tractor lift must be only used for lifting and lowering to

and from a level and stable surface.

Never

 use in wet conditions.

Do not

 attempt to lift the front and back of the tractor at the same 

time.

Do not

 use tractor lift as an automotive lift, or for any other use for 

which it is not intended or designed.

If tractor lift is bowing while lifting or lowering your tractor, which 

indicates an overload condition, remove the tractor immediately.

Do not

 attempt to lift or lower any power equipment while motor is 

running.

Never

 engage blades while using tractor lift.

Always

 disconnect spark plug wire from tractor before beginning

any work on tractor.

Do not

 exceed the rated capacity of the tractor lift - 270#.

Failure to follow these warnings may result in property

damage and/or serious bodily injury.

                                 FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.                                 

Page 2.

SAFETY INSTRUCTIONS

Be sure to read and follow all safety instructions and

warnings. Failure to follow these instructions may result in

damage to the product and/or serious personal injury.

Danger of serious personal injury exists. Serious personal

injury can occur when using a lifting device.

Never

 attempt to ride any vehicle up or down the tractor lift.

Do not climb onto tractor while tractor is in the elevated position.

When working on the front of the tractor always place wheel 

chocks in back of the rear wheels/tires.

Always raise and lower tractor lift in a controlled fashion; do not 

allow the tractor to drop too quickly, damage could occur.

Make sure lifting arms are aligned and set to the proper distance apart

so that the equipment being loaded is well balanced on the lift.

Do not remove warning decals from product.

Before each use, always check for any worn, loose, or 

damaged parts on the tractor lift. If any damage is present, 

DO NOT USE THE TRACTOR LIFT

.

Periodically check the fasteners to make sure they are still

tight and in place.

Keep lift surface clean by occasionally cleaning with water and 

   any mild detergent.

Do not add to or try to modify the tractor lift in any way.

Any modifications will void any warranties.

Failure to abide by the warnings and read the safety instructions may 

result in loss of load, damage to lift and/or property, serious personal 

and/or fatal injury.

Содержание 610.246














Отзывы: