background image

4

OTHER SAFETY WARNINGS

Maintain the unit with care.

All service, other than the maintenance procedures described in
this manual, should be performed by a qualified service dealer.

Never remove, modify or make inoperative any safety device
furnished with the unit.

Before inspecting, maintaining, cleaning, storing, transporting or
replacing any parts on the unit:

1. Stop the unit.
2. Make sure all moving parts have stopped. 
3. Allow the unit to cool.
4. For gas-powered units, disconnect the spark plug wire. For

electric-powered units, disconnect the unit from the power
source.

Secure the unit while transporting.

Never store the unit with fuel in the tank, inside a building where
fumes may reach an open flame (pilot lights, etc.) or sparks
(switches, electrical motors, etc.).

Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach of
children.

Never douse or squirt the unit with water or any other liquid.
Keep handles dry, clean and free from debris. Clean the unit
after each use. Refer to 

Cleaning and Storage

. Do not use

solvents or strong detergents.

Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.

SAVE THESE INSTRUCTIONS

Use the unit only in daylight or good artificial light.

Use the right tool. Only use this tool for its intended purpose.

Always hold the unit with both hands when operating. Keep a
firm grip on both handles or grips.

Do not overreach. Always keep proper footing and balance. Take
extra care when working on stairs, steep slopes or inclines. To
avoid serious injury, do not operate the unit while on a ladder or
a roof.

Keep hands, face, and feet away from all moving parts. Do not
touch or try to stop moving parts.

Do not operate the unit faster than the speed needed to do the job.
Do not run the unit at high speed when not in use.

Do not force the unit. It will do a better, safer job when used at
the intended rate.

Always stop the unit when operation is delayed or when walking
from one location to another.

If you strike or become entangled with a foreign object, stop the
unit immediately and check for damage. Do not operate before
repairing damage. Do not operate the unit with loose or
damaged parts.

Use only original equipment manufacturer (OEM) replacement
parts and accessories for this unit. Use of any other parts or
accessories could lead to serious injury to the user, or damage
to the unit, and void the warranty.

Keep the unit clean. Carefully remove vegetation and other
debris that could block moving parts.

If the unit starts to vibrate abnormally, stop the unit immediately.
Inspect the unit for the cause of the vibration. Vibration is
generally an indicator of trouble.

Содержание 316.792640

























Отзывы: