38
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Premium Control Console:
1.
With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Premium Control Console:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then
press and
hold the Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the SRT button on the opener
panel. After the opener lights flash, release the
Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
To Add the Keyless Entry
Sears offers many useful accessories for your garage door opener. They are illustrated below with
Sears model numbers and descriptions.
18792
18790
18756
41A5281
18835
18752
SECURITY
✚
3-Function Remote
Control:
Includes visor clip.
SECURITY
✚
Single-Function
Remote Control:
Includes visor clip.
SECURITY
✚
Compact
3-Function Remote Control:
With loop for attaching key ring.
Outdoor Key Switch:
Operates the garage door
automatically from outside when
remote control is not handy.
Plug-In Light Control:
Enables homeowner to turn on a
lamp, television or other appliance
from car, bedside, or anywhere in
the home with a remote.
18795
SECURITY
✚
Keyless Entry:
Enables homeowner to operate garage
door opener from outside by entering a
password. Also can add a temporary
password for visitors or service
persons. This temporary password can
be limited to a programmable number
of hours or entries.
Emergency Key Release:
Required for a garage with NO
access door.
Extension Brackets:
(Available only through Sears Parts
& Service)
(Optional) For safety sensor
installation onto the wall or floor.
18785
Door Clearance Brackets:
(
For Sectional Doors Only)
Replaces top brackets and rollers
on door to reduce height of door
travel. For use when installing
opener in garage with low
headroom clearance.
10 Foot Rail Extension:
To allow a 10 foot door to open fully.
8 Foot Rail Extension:
To allow an 8 foot door to open fully.
18768
18770
18791
Accessories
