background image

2

TABLE OF CONTENTS

Warranty……………........................................................…………………………..Page      2   
Safety Symbols……........................................................……………………….….Page      3    
Safety Instructions…........................................................………………………….Pages    4 - 10  
Unpacking ………….........................................................………………………….Page    11
Description ......................................................………………………………………Pages  12 - 13  
Operation ………………………………………........................................................Pages  14 - 22  
Maintenance..........................................................................................................Pages  22 - 24
Accessories...........................................................................................................Pages  24 - 25
Repair Parts..........................................................................................................Pages  26 - 31
Sears Repair Parts Phone Numbers.....................................................................Back Cover

SAVE THESE INSTRUCTIONS!

READ ALL INSTRUCTIONS!

 

ONE YEAR FULL WARRANTY ON COMPANION TOOL
If this Companion tool fails due to a defect in material or workmanship within one year from 

the date of purchase, 

RETURN IT TO ANY SEARS STORE OR OTHER CRAFTSMAN 

OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT.
This warranty does not include expendable parts such as lamps, batteries, bits or blades.
This warranty is void if this tool is used for commercial or rental purposes.
This warranty gives you specific legal rights, and you may also have other rights which 

vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179

10-4-07  Drill
10300-10400

!

                                  Some dust created by using power tools contains chemicals known to 

the State of California to cause cancer and birth defects or other reproductive harm.

WARNING:

3

SAFETY SYMBOLS

SYMBOL MEANING

               

SAFETY ALERT SYMBOL:

 Indicates DANGER, WARNING, OR 

                CAUTION. May be used in conjunction with other symbols or pictographs.

      WARNING

      CAUTION

      DANGER

Failure to obey this safety warning WILL result in death or 

serious injury to yourself or to others. Always follow the 

safety precautions to reduce the risk of fire, electric shock 

and personal injury.

Failure to obey this safety warning CAN result in death or 

serious injury to yourself or to others. Always follow the 

safety precautions to reduce the risk of fire, electric shock 

and personal injury.

Failure to obey this safety warning MAY result in personal 

injury to yourself or others or property damage.  Always 

follow the safety precautions to reduce the risk of fire, 

electric shock and personal injury.

DAMAGE PREVENTION AND INFORMATION MESSAGES 
These inform user of

 important information and/or instructions that could lead to 

equipment or other property damage if not followed. Each message is preceded by the 

word “NOTE:” as in the example below:

The purpose of safety symbols is to attract your attention to possible dangers. 

The safety symbols, and the explanations with them, deserve your careful 

attention and understanding. The symbol warnings 

DO NOT by themselves 

eliminate any danger. The instructions and warnings they give are no substitutes 

for proper accident prevention measures.

NOTE:  

Equipment and/or property damage may result if these instructions 

are not followed.

!

      

WARNING:

     

                 

 

The operation of any drill / driver can 

result in foreign objects being thrown into your eyes, 

which can result in severe eye damage. Before beginning 

power tool operation, ALWAYS wear safety goggles or 

safety glasses with side shield and a full-face shield 

when needed. We recommend a Wide Vision Safety 

Mask for use over eyeglasses or standard safety glasses 

with side shield, available at Sears Stores or other 

Craftsman Outlets.

      

WARNING: 

BE SURE to read and understand all safety instructions in 

this manual, including all safety alert symbols such as “DANGER”, “WARNING” 

and “CAUTION”, BEFORE using this tool. Failure to follow all instructions 

listed below may result in electric shock, fire and/or serious personal injury.

!

!

!

!

!

Содержание 11533 - 9.6 Volt Cordless Model


















Отзывы: