8
ASSEMBLY
Attaching The Extension Arms
1. Slide the extension arms into the frame.
2. The locking pin on the extension arms should be facing inwards towards
the centreline of the stand. You will need to depress this twice (once
when the locking pin reaches the frame and again when it pops through
the locating hole further in).
3. Continue sliding the extension arm into the frame
until the desired length is reached.
4. Insert a fastening knob into the hole on the frame
turn it clockwise to secure the extension arm in
place.
5. Insert a roller arm into the collar on the extension
arm. The material support shelf should be facing
inwards towards the centre of the stand.
6. Insert a fastening knob into the bracket and turn
it clockwise to tighten the roller arm into place.
7. Repeat the same procedure with the opposite
extension arm.