6
MITRE SAW STAND SAFETY WARNINGS
Thisapplianceisnotintendedforusebyyoungorinfirmpersonsunlesssupervisedbya
responsiblepersontoensurethattheycanusetheappliancesafely.Youngchildrenshouldbe
supervised to ensure that they do not play with the appliance.
•
Always ensure the mitre saw base is properly secured to the stand prior to operation.
•
Always ensure the stand legs have been locked into place prior to operation.
•
Take care when moving the stand especially when a mitre saw is mounted.
•
Do not use the stand for any other purpose than what it is intended for.
•
Do not use the stand as a stepping stool or ladder.
•
Make sure all moving parts are free from interference.
•
Keep hands clear of all moving parts.
•
Ensure the Mitre Saw Stand is set up on firm ground in a stable manner.
•
Use the Mitre Saw Stand in a dry place protected from the rain.
•
Be aware of overbalancing. When a large piece is cut from one end of a job, the
remaining piece may be heavy enough to over-balance the Mitre Saw Stand.
Always ensure the workpiece is well supported.
•
When transporting the Mitre Saw Stand in a vehicle, always tie it down to prevent
movement and possible damage.
•
Check to make sure that all fixing screws and knobs are tight and all legs are locked into
position before operation.
•
The Mitre Saw Stand must be used only for its prescribed purpose. Any use other than
those mentioned in these instructions will be considered a case of misuse.
•
Craftright shall not be liable for any damage or injury resulting from such cases of
misuse.
•
Craftright shall not be liable for any changes made to the Mitre Saw Stand nor for any
damage resulting from such changes.