CRAFTMASTER STAINLESS KEGGERNUAT, Руководство по эксплуатации

Страница: 7 / 23

7
CHANGING POLARITY
1. You will need a phillips head screwdriver to complete this task.
2. Expose the wires by opening the plug up. Unscrew the two screws on the
face of the plug, as well as the two screws located on the back.
3. Slide down the plug cover and expose the wires. Next, look at the top of
the plug. You will see four prongs. The L shape prong is your ground wire, it
is also indicated by a green lug. Do not change this wire. The other three
prongs are your live wires.
4 Change any two of those three live wires to reverse the polarity. Loosen
the lugs under the two prongs you would like to change. The wires should
now freely pull out. Switch the two wires and re-tighten the lugs.
5. Make sure you did not change your ground wire (L Shape Prong).
6. Slide the plug cover back up. Making sure to line up the tongue and
groove on the plug and cover. Re-tighten all four screws.
7. You are now ready to plug in your Keggernaut and retest the polarity.
GROUND
A B
A B
** VIDEOS AVAILABLE ON YOUTUBE **