CRAFTMASTER STAINLESS KEGGERNUAT, Руководство по эксплуатации

Страница: 13 / 23

13
CLEANING STAGES
This stage is going to release and drain any remaining fluids in your kegs.
It is recommended that you drain your kegs as much as possible before hooking them to
the washer ensuring this stage can work efficiently.
If you are noticing fluid is still evacuating the kegs as this stage completes, then you are
going to want to increase the duration on the parameter select page till nothing is
coming out.
This clean water rinse will help remove and loosen any built up sediment in the keg
before deep cleaning with caustic.
Extend or shorten on the parameter select page to your personal preference.
This stage removes all the water from the previous stage.
You want to make sure the keg is empty of water before moving to the next stage.
Otherwise, it will dilute your chemicals .
Extend this time as needed till you have no more discharge at the end of the stage.
** VIDEOS AVAILABLE ON YOUTUBE **