page 9
10. Automated Learning Process./Activating Code.
1
4
1
2
12V
1 2 3 4
D
3
5
6
ON
BACK
FRONT PANEL
SET
ON ECE
Remove battery cover on back side of remote control transmitter.
Install 12-volt battery (provided) in transmitter and wall control.
IMPORTANT
: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
Fan
SPEED
control buttons
1
:
Use to control the ceiling fan speed 1-6
Fan
OFF
button
2
:
Use to turn the fan off
REVERSE
function button
3
:
Use to control fan direction
LIGHTING
button
4
:
Use to control down-light and up-light (if applicable)
CODE SWITCHES
and
SET
button
5:
With fan power off, arrange
CODE SWITCHES
to desired code
setting. Turn fan power on, press and hold
SET
button on back of
remote control and on wall control for 5 seconds within 60 seconds
of powering fan in order to synchronize with fan motor.
DIMMING
function
6
:
Dimming capability is determined by the type of bulbs provided
with the fan. If no bulbs are provided, dimming function will
not
work.
OFF position =
D
On position =
ON
ON
/
OFF
slider switch
7
:
[Wall control only] Use to turn wall control on or off
Replace the battery cover on transmitter. Select decor cover for wall control and press firmly onto front of
wall control.
IMPORTANT:
Remote and wall
controls must be
SYNCHRONIZED with
fan in order to
properly function.
I
II
IV
VI
III
V
remote control
wall control
5
12
3
4
D
12V
5
ON
ECE
ON
6
4
3
1
7
I
OFF
ON
II
III
IV
V
VI
2
5
IMPORTANT:
The code switches in
remote and wall
controls MUST MATCH
for fan to function
properly.
