page 5
6. Wiring.
CAUTION
:
Be sure outlet box is properly grounded and that a
ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with Local Codes or
Ordinances and the National Electrical Code. If you are
unfamiliar with electrical wiring or if the house/building wires
are different colors than those referred to below, please use a
qualified electrician.
When fan is secured in place on the mounting plate, electrical
wiring can be made
as follows:
Connect
BLACK
and
BLUE
wire from fan to
BLACK
wire from
ceiling with wire connector provided.
Connect
WHITE
wire from fan to
WHITE
wire from ceiling
with wire connector provided.
Connect all
GROUND
(
GREEN
) wires together from fan to
BARE
/
GREEN
wire from ceiling with wire connector provided.
If you intend to control the fan light with a separate light
switch connect
BLUE
wire from fan to the
BLACK
(or
RED)
supply from the independent switch.
* Wrap each wire connector separately with electrical tape as
an extra safety measure.
7. Attachment of Motor Housing.
Align grooves inside the top of motor
housing with screws on mounting plate,
making sure to align red dot with screw
hole on side of motor housing.
Twist motor housing clockwise until it
clicks.
Re-install the large screw that was
previously removed from mounting plate
(Step 5, page 4)
on side of motor housing to
secure motor housing.
WHITE
WHITE
BLACK
BLACK
GROUND/GREEN
motor housing
groove
large screw
red dot
screw hole
