Motor Flywheel
Red Dot
Housing Slots
Light Assembly Housing
11
Step 11
For blade assembly, position blade (7) through slot in fan motor housing so
that all screw holes are aligned (as shown in figure below). Position light
house assembly so that the top screw hole in blade lines up with housing slot
in flywheel. Using motor screws (S5), insert through blade and into the fan
motor. Tighten securely.
Remove rubber cushions, saving motor screws for blade installation. Using
motor screws (S5) provided, line up holes from the blade arm with the holes
in the motor housing. Tighten screws securely.
12
Step 12
First install Halogen Bulb by screwing bulb into socket. Install Light Kit
Assembly by aligning slots on light kit to dimples on Light Assembly
Housing. Turn glass clockwise to lock securely in place.
NOTE:
Hold fan motor housing while turning light kit/cover to ensure proper installation.
Light Kit Assembly
Slots
Dimples
Light Assembly Housing
Halogen Bulb
CAUTION:
Handle bulb using the protective bulb covering provided as
touching the glass with fingers will reduce the life of the bulb.
