6. Wiring.
WARNING
: Turn off circuit breakers to current
fixture from breaker panel and be sure switch
is turned to the OFF position.
CAUTION
:
Be sure outlet box is properly
grounded and that a ground wire (
GREEN
or
Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with
electrical wiring or if the house/building wires
are different colors than those referred to below,
please use a qualified electrician.
NOTE
:
Excess lead wire length from the fan can
be cut to the desired length and then stripped.
DANGER
: If using this fan in a WET location,
this fan must be connected to a supply circuit
that is protected by a Ground Fault Circuit
Interrupter (GFCI) to reduce the risk of
personal injury, electrical shock or death.
When downrod is secured in place on the
hanging bracket, electrical wiring can be
made as follows:
Connect
BLACK
and
BLUE
wires from fan to
BLACK
wire from ceiling with wire connector
provided.
Connect
WHITE
wire from fan to
WHITE
wire
from ceiling with wire connector provided.
Connect all
GROUND
(
GREEN
) wires together
from fan to
BARE
/
GREEN
wire from ceiling
with wire connector provided.
If you intend to control the fan light with a
separate light switch, connect
BLUE
wire from
fan to the
BLACK
(or
RED
) supply from the
independent switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
This fan is remote control adaptable (remote
control sold separately).
Note
: Only remote
controls approved for WET locations can be used
with this fan.
wire
connector
black
black
white
white
blue
black supply wire
ground
(green
or bare)
white supply wire
from ceiling
from fan
ground
(green or bare)
*
page 7
