page 10
9. Light Kit Assembly.
Remove 1 screw from motor plate on
underside of motor housing and partially
loosen the other 2 screws.
Align slotted holes in shade with loosened
screws in motor plate, allowing molex
connectors to come through center hole in
shade. Twist shade to lock. Re-insert screw
that was previously removed and securely
tighten all 3 screws with a Phillips
screwdriver.
[
Refer to
diagram 1
.]
Remove 2 screws from underside of shade
and partially loosen the other 2 screws.
Connect
WHITE
wire from motor housing to
WHITE
wire from light kit fitter and
BLUE
(or
BLACK
) wire from motor housing to
BLUE
(or
BLACK
) wire from light kit fitter. Make
sure molex connections snap together
completely.
[
Refer to
diagram 1
.]
Carefully arrange wiring within the shade.
Align slotted holes in light kit fitter with
loosened screws in shade. Twist light kit
fitter to lock. Re-insert screws previously
removed and securely tighten all 4 screws
with a Phillips screwdriver.
[
Refer to
diagram 1
.
]
Install 2 medium base 5 watt LED bulbs
(included).
Important
: When you need to replace bulbs,
please allow bulb(s) and metal cage to cool
down before touching them.
[
Refer to
diagram 2
.
]
Locate 4 screws in hardware pack. Align
holes on top of metal cage with holes on
outer edge of shade. Secure metal cage with
the 4 screws. Securely tighten all 4 screws
with a Phillips screwdriver.
[
Refer to
diagram 3
.
]
shade
light kit fitter
motor plate
molex
connections
motor
housing
motor housing
bulb
bulb
shade
metal cage
screw
screw
diagram 1
diagram 1
diagram 3
motor housing
