page 8
9. Light Kit Assembly.
Remove 1 screw from motor plate on underside
of motor housing and partially loosen the other
2 screws. Align slotted holes in fitter plate with
loosened screws in motor plate, allowing
female plug from motor housing to come
through hole in middle of fitter plate. Twist
fitter plate to lock. Re-insert screw that was
previously removed and securely tighten all 3
screws with a Phillips screwdriver. [
Refer to
diagram 1
.
]
Remove 1 screw from underside of fitter plate
and partially loosen the other 2 screws.
Connect female plug from motor housing to
male plug from the LED light kit, matching up
the colors on the male plug with the colors on
the female plug for correct fit. Make sure that
plugs connect securely. Carefully arrange
wiring within the back of LED light kit. Align
slotted holes in LED light kit with loosened
screws in fitter plate. Twist LED light kit to lock.
Re-insert screw that was previously removed
and tighten all 3 screws securely. [
Refer to
diagram 2
.
]
Locate slots on glass shade and align with
nodules on inside of LED light kit.
Gently push
up on glass shade and turn
to the RIGHT
(clockwise)
until it slides completely into place.
[
Refer to
diagram 3
.
]
glass shade
nodules
slots
LED light kit
LED light kit
motor plate
female plug
fitter plate
diagram 2
diagram 1
diagram 3
motor
housing
motor
housing
female
plug
male
plug
