page 8
10. Automated Learning Process./Activating Code.
Install 12-volt battery (provided) in transmitter and wall control (if applicable).
IMPORTANT
: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
LED LIGHT:
Comes on when any button is pressed.
FAN
SPEED,
Buttons
1-6
:
Use to control the ceiling fan speed 1-6.
REVERSE
:
Use to control fan direction.
CODE SWITCHES
and
LEARN
button
:
With fan power off, arrange
CODE SWITCHES
to desired code
setting. Turn fan power on. Within 30 seconds of powering fan,
press and hold
LEARN
button on remote control and/or wall
control for 5 seconds (or until fan beeps twice) in order to
synchronize remotes with fan motor.
UP-LIGHT
:
Use for up-light (if applicable).
LIGHT KIT
: Use for light kit (if applicable).
DIMMER SWITCH
:
Dimming capability is determined by the type of bulbs provided
with the light kit.
ON position =
D
OFF position =
O
FAN OFF:
Use to turn fan off.
ON
/
OFF
slider switch:
[
Wall control only
] Use to turn wall control on or off.
Select faceplate for remote control and/or wall control and press firmly onto front of remote control/wall
control.
IMPORTANT
:
The Automated Learning Process takes 5 minutes to complete. Please leave the fan “on”
for the duration of the 5-minute programming and do not use the remote control
during this time.
REMOTE
CONTROL
12
3
4
D
12V
ON
O
UP LIGHT
LIGHT KIT
FAN OFF
REVERSE
1
2
3 4
5
6
1
2
3
4
5
6
LEARN
WALL
CONTROL
12
3
4
D
ON
O
DIMMER
IMPORTANT:
Remote and wall
controls must be
SYNCHRONIZED with
fan in order to
properly function.
IMPORTANT:
The code switches in
remote and wall
controls MUST MATCH
for fan to function
properly.
UP LIGHT
LIGHT KIT
FAN OFF
REVERSE
ON/OFF
SLIDER
SWITCH
CODE
SWITCHES
LEARN
CODE
SWITCHES
DIMMER
FAN SPEED
FAN SPEED
LED LIGHT
LED LIGHT
12V
