page 9
11. Testing Your Fan.
It is recommended that you test fan before finalizing
installation. Test wall control (optional installation)
by locating ON/OFF slider switch on wall control,
then set to ON position. Test light ON/OFF and then
test fan speeds. Next, locate remote control. Start
with the lights OFF and test the light ON/OFF
function button. Test fan speed with different fan
speed buttons (1 - 6). If the remote control operates
the functions of the fan, battery has been installed
correctly. If the wall and/or remote control do (does)
not operate the fan functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
Fan
must
be on LOW
before
setting the fan in
reverse. Use button to recirculate air depending
on the season. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
NOTE
: If the wall/remote control interferes with
other appliances, change code switches on the wall/
remote control to another code. If you do change
the code,
turn power off first
. After setting the new
code on the wall/remote control, go back to the
instructions for the LEARN button in Section 10
(page 8).
IMPORTANT
: Remote control (and wall control, if
applicable) must be synchronized with fan in order
to properly function.
1
2
3
4
5
6
