It is recommended that you test fan before finalizing
installation. Test wall control (optional installation)
by locating ON/OFF slider switch on wall control,
then set to ON position. Test fan speeds. Next, locate
remote control. Test fan speed with different fan
speed buttons (1 - 6). If the remote control operates
the functions of the fan, battery has been installed
correctly. If the wall and/or remote control do (does)
not operate the fan functions, refer to
"Troubleshooting" section to solve any issues before
contacting Customer Service.
Fan
must
be on LOW
before
setting the fan in
reverse. Use button to recirculate air depending
on the season. A ceiling fan will allow you to raise
your thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
IMPORTANT
: Remote control (and wall control, if
applicable) must be synchronized with fan in order
to properly function.
11. Testing Your Fan.
page 11
CAUTION
:
“DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK.” - When
disposing of household alkaline batteries, it is best to check with your local and state recycling or
household hazardous waste coordinators concerning the specifics of the program in your area. You may
also locate a recycling center by calling 1-800-8-BATTERY or 1-877-2-RECYCLE or visit
www.epa.gov/epawaste/index.htm or www.earth911.org for more information.
WARNING
: Do not mix old and new batteries; Do not mix alkaline, standard (carbon - zinc), or rechargeable
(nickel - cadmium) batteries or equivalent.
Non-rechargeable batteries are not to be recharged; Do not mix different types of batteries such as alkaline,
carbon-zinc, or rechargeable batteries; Do not mix old and new batteries; Batteries are to be inserted with
the correct polarity; Exhausted batteries are to be removed from the product.
1
2
3
4
5
6
