11
Étape 11
Installation des 5 pales
Enlevez les coussinets de mousse et conservez les vis de moteur pour
l’installation des pales. À l’aide des vis de moteur fournies (S5), alignez
les trous du bras de pale avec ceux du boîtier de moteur. Serrez
fermement les vis.
7
Step 7
For added security, attach safety cable from fan unit to "J" hook (S10) in
outlet box. Secure by looping zip tie (S11) through safety cable and "J"
hook. Tighten zip tie securely. Lift fan onto the mounting bracket (1).
Turn housing until hanging ball seats itself into ball socket (listen for
click).
NOTE
: Parts furnished will allow
you to install your fan at up to a 35
∞
angle. Angles greater than 35
∞
will require a 45
∞
angle adapter
(see dealer).
NOTE
: J Hook
installation is a Canadian
requirement only.
Outlet Box (A)
Support Beam
Ceiling
Green Ground Wire
“J” Hook (S10)
OUTLET BOX
“J” Hook (S10)
Safety Cable
Zip Tie (S11)
Mounting Bracket (1)
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
