Composants inclus
Pièces
Quantité
1. Support de montage
1
2. Assemblage de la tige de suspension
Tige de 6 x 15 cm (2 po x 4 po )
(Utilisez la longueur désirée)
1
3. Coupelle
1
4. Couvre-bride
1
5. Boîtier du ventilateur et du moteur 1
6. Bras de pale
5
7. Pales (vendues séparément)
5
8. Assemblage du boîtier
de
l'interrupteur
1
9. Kit
d'équilibrage
1
1
2
3
6
Paquet de vis
Quantité
S1. Vis à bois
2
S2. Vis (pour coupelle)
3
S3. Vis et rondelles des supports
2
S4. Vis des pales
16
S5. Vis du moteur
(quatre vis sur le moteur)
11
S6. Connecteurs de fils
3
S7. Boulon et écrou de sécurité
1
S8. Chaînes de traction
2
S9. Vis du boîtier d’interrupteur
1
S10. Crochet en « J »
1
S11. Bride
1
S2
S3
S6
S5
S1
S4
4
8
5
S10
S11
S9
S8
®
S7
7
Common Problems
Problem A: Fan Will not Start
Remedies:
1. Check fuse or circuit breaker and replace if necessary
2. Turn off electrical power and check all wire connectors.
3. Check on/off TCS and wall control selector switch. See operation
instructions.
Problem B: Fan is Excessively Noisy
Remedies:
1. Check that all screws in fan assembly are tight and properly seated.
2. Check to make sure mounting bracket is installed properly.
3. Check to make sure light kit and glass reinstalled properly and tight.
4. If wall control is used, insure the wall control is not a transformer or
a variable speed type.
Problem C: Fan Wobbles
Remedies:
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are screwed firmly into motor.
3. Check the weight of blades. All our blades are weighed on electronic
scales. The weight is marked on the reverse side of the fan blade near
the motor end. All of the blades should be the same weight to
prevent fan from wobbling.
4. A balancing kit is enclosed if needed.
Weight:
The weight of the complete fan, including assembly hardware is 25.1
lbs.
Ground
Black
White
White
Green
Optional
Light
Black
Blue
Light
Switch
Fan
Switch
Black
Figure C
Electrical Connections Continued…
