Craftex CX08HC, Руководство пользователя

Страница: 10 / 24

10
EXTENSION TABLE
Take the extension table and locate the
holes for the cap screws on the in-feed
table. Attach the extension table to the in-
feed table finger tightening the cap screws.
See Figure-5
Figure-5 Finger tighten the cap screws
Now, you need a straight edge to adjust the
extension table surface to the in-feed table.
Place the straight edge on the table and
adjust the level of the table. Once the table
is completely leveled, tighten all the cap
screws shown in figure-4.
Figure-6 Leveling the table
FENCE
To install the fence first you have to install
the fence carriage to the table stand using
washers and cap screws (finger-tighten).
See Figure 7.
Figure-7 Installing the fence carriage
Now, take the fence out of the packaging
and attach to the carriage. Use the two
washers and cap screws provided, and
tighten the fence to the carriage. See
Figure-8.
Figure-8 Attaching the fence to the carriage