Craftex CT125, Руководство пользователя

Страница: 13 / 29

13
CT125 – BABY DRUM SANDER 13”
TRACKING
The conveyor must track straight for proper sanding. If the conveyor tracks to
either side and not straight, you must fix the tracking. When tracking your
conveyor, remember that this process can take some time and that proper
balance and patience is required. To make the conveyor move in the middle of
the rollers, it is recommended that you first over tighten the loose side (the side
the belt is tracking towards) and then loosen that same side in order to make the
conveyor stay in position. You can try this for both sides but must ensure that the
conveyor tracks in the middle by trail and error.
1) Turn the conveyor belt ON . Watch the conveyor track and notice
which way it is tracking.
2) Once you have determined which way it is tracking, turn the
machine OFF, tension the tracking bolt on the loose side (the
direction the belt is tracking to). Turn the machine ON to see if it is
tracking the opposite way. (This may take some time to notice a
difference but be patient)
3) When the conveyor is near the middle of the table, loosen the
adjustment knobs until the conveyor itself stops moving sideways
and tracks straight.
4) Repeat steps 2 & 3 if you do not get results right away. This
process may take several minutes.