IDEX USER MANUAL
7
7
2
4
8
3
6
1
9
5
10
1.
AC Power cable according to your region (1x)
2.
Filament guide tube holder (2x)
3.
Filament guide tube (2x)
4.
Filament spool holder (2x)
5.
Filament spool (2x)
6.
Hex wrenches (5x)
7.
Flash drive (1x)
8.
USB A-B cable (1x)
9.
Nozzle kit (2x)
10.
Cleaning kit (1x)
3. UNPACKING AND ASSEMBLY
3.1. Unpacking the printer
1.
Please check the packaging for any damage. If you detect any damage please contact the reseller.
2.
Place the Craftbot box on the ground on a level surface. Make sure that there is plenty of open
space around you.
3.
Open the box with care, not to damage the contents if you are using a blade. Be careful and
watch out for the printer as well.
4.
Remove the strips and pull off the top box. If the strips are missing from the packaging, contact
your reseller.
5.
Remove the protective foam insert. You will find the Quick Start Guide located inside the top
protective foam insert.
6.
There is a box inserted which contains the accessories (including a flash drive with a copy of the
Craftbot user manual). Remove the box with care as it supports the extruder during shipping.
7.
Now you will find the Craftbot 3D printer itself completely enclosed in a protective plastic bag.
Open the plastic covering.
8.
You will notice 2 handle holes for picking up the unit.
Firmly grasp the frame of the Craftbot.
Consider its weight. Request physical help if needed.
9.
Make sure you do not touch the extruder or the electronic panel inside the appliance.
10.
Place the Craftbot 3D printer on a stable and level surface with sufficient space surrounding around it.
3.2. Accessories
Below you can see the contents of the box. First of all, check the list to make sure nothing is missing.
Содержание FLOW GENERATION IDEX
Страница 1: ...IDEX USER MANUAL...
