CraftBot FLOW GENERATION IDEX, Руководство пользователя

Страница: 12 / 46

IDEX USER MANUAL
12
FMS calibration
This calibration will measure the Filament Monitoring
System (FMS) sensor values and adjust if necessary.
Make sure you select the correct type of filament on the
screen. The head heats up to the correct temperature.
After it has heated, load the filament to the extruder.
To extrude filament from the print head, use the down
arrow on the touch screen.
• Press and hold the button to keep extracting
filament through the head.
• Automatic filament feed can also be performed
by pressing the Load
button on the
bottom bar.
• By pressing the button once, the head automatically
extrudes some filament.
Filament loading is successful when the melted filament
flows out of nozzle evenly and vertically.
Caution! The freshly spilled melted filament is hot.
Avoid contact with spilled filaments or other flammable
materials in the nearby.
Press the Next button.
After successful FMS calibration you can print some cool
things.