manualshive.com logo in svg

CraftBot FLOW GENERATION IDEX, Руководство пользователя, Страница: 38 / 46

Поделиться
Скачать
CraftBot FLOW GENERATION IDEX Скачать руководство пользователя страница 38

IDEX USER MANUAL

38

7.6. Relocating the fan assembly to 

the extruder assembly

• 

Move the fan Assembly over the extruder first about 

1 centimeter below the required height. Gently lift 

the fan assembly to connect to the 2 boards together 

but first insert the central pin from the Extender 

board into the hole of the Fan extender board below 

it.

• 

When you have inserted the pin into the central hole, 

align the side bolt holes of the Extruder with the fan 

casing holes and place an Allen key into the front 

bolt hole on the right side again to keep it steady.

• 

Start inserting the first bolt into the rear hole on the 

right side to hold the correct position, taking some of 

the stress off the pins.

• 

Place the second bolt into the front left bolt hole 

to hold the fan assembly more level and upright on 

the extruder Assembly. Now use the Allen key to 

secure all 4 of the bolts that attach the fan set to the 

extruder assembly.

• 

Now you have finished disassembling and 

reassembling the extruder fan set from the extruder 

assembly.

Содержание FLOW GENERATION IDEX















































Отзывы:

Нет отзывов