Using your CraftDragon® ImPress
How to use the CraftDragon® ImPress for Precision Ink Stamping
By replacing the Imp with the Flexi-bloc™ you can open up a whole new world of ink stamping enjoyment. Because of the configuration
of the press and the Flexi-bloc™ you can achieve a smudge free, perfect image and create new artistic effects not previously possible.
To replace the Imp with the Flexi-bloc™
·
Switch off and remove plug from the Mains supply
·
Holding the locking handles either side of the press
1.
push the press down with the handles so that the imp meets the print deck
2.
Pull locking handles apart to release the Imp
3.
let the press handle return gently to up position
4.
remove imp from print deck
5.
position Flexi-bloc™ to locate with the lugs on the arms of the press
6.
pull down the press handle, matching the lugs to the pillars of the Flexi-bloc™ and click into place
·
Apply your chosen ink stamp to the Flexi-bloc™
·
Apply ink by dabbing upwards with ink pad or bringing down to ink pad with a light dabbing motion.
·
Position your project under the flex-bloc™ and pull the handle of the press down applying firm pressure.
For how to get the best from your press and Flexi-bloc™ combination go to www.craftdragon.com.
© CraftDragon
®
11
