Using your CraftDragon® ImPress
How to use the CraftDragon® ImPress for embellishing and hot press printing
With the tri-plate inserted into the channels on the base of the imp, the Impress becomes a hot press to apply hot fix crystals designs, vinyl cut-outs
and transfer prints to an impressive array of materials and objects, including T-shirts, coasters etc.
Select required temperature and leave to heat up
To apply crystal designs
Ÿ
If applying crystals or studs to garments, place garment pad on print deck.
Ÿ
Press fabric with the warm tri-plate to dry the area before applying embellishments or transfer prints.
Ÿ
Remove opaque backing film from design.
Ÿ
Place design face up with clear application film, sticky side down onto work.
Ÿ
Cover with thermo-sheet.
Ÿ
Bring the press down to the work with continuous pressure for approximately 15 seconds.
Ÿ
Allow work to cool.
Ÿ
Slowly peel back clear application film examining for any unfixed crystals.
Ÿ
If any crystals have not stuck re-apply application film re-cover with thermo-sheet and re-press.
Ÿ
Use this technique to also embellish greeting cards, scrapbook pages etc.
To apply vinyl cut-out designs to fabrics
Ÿ
Position fabric on top of garment pad on print deck.
Ÿ
Place design where required on fabric or garment.
Ÿ
Cover with thermo-sheet.
Ÿ
Bring the press down to the work with continuous pressure for approximately 30 seconds.
Ÿ
Allow work to cool.
Ÿ
Peel back clear application film.
Ÿ
If any area has not stuck, re-cover with thermo-sheet and re-press.
To apply transfer prints
Ÿ
Print your image using sublimation inks or buy pre-printed images.
Ÿ
Position image face down onto project.
Ÿ
Cover with thermo-sheet.
Ÿ
Bring the press down to the work with continuous pressure for approximately 60 seconds.
Ÿ
Allow work to cool.
Ÿ
Peel back transfer paper.
For more information on any of these techniques go to www.craftdragon.com.
© CraftDragon
®
12