Crafco SS60-Diesel, Руководство пользователя

Страница: 63 / 119

Super Shot 60 Diesel Melter Part Manual
Chapter 8 Troubleshooting
©2016 by Crafco, Inc. All Rights Reserved
………………...………………………………..……………...Troubleshooting 8-15
Step Possible Cause If . . .
9
Is there 12Vdc between ignition switch “ACC”
terminal and nearby ground source (black
wire)? 
Yes, check for loose connections or broken
wires between “ACC” terminal and circuit
breaker.

No, go to Step 9a.
9a
Is there 12Vdc between “B” (blue wire) of
ignition switch and nearby ground source
(black wire)?

Yes, replace ignition switch.

No, go to Step 10.
10 Is there 12Vdc between blue wire on starter
solenoid and nearby ground source (black
wire or bare metal on engine case)?

Yes, check for loose or broken wire
between starter solenoid and ignition
switch.

No, go to Step 10a.
10a Check connections and condition of red
battery cable?

Yes, there should be 12Vdc at all previous
steps.

No, replace battery cable.
Table 8-17 Mixer Electrical Troubleshooting (continued)