Crafco SS60-Diesel, Руководство пользователя

Страница: 53 / 119

Super Shot 60 Diesel Melter Part Manual
Chapter 8 Troubleshooting
©2016 by Crafco, Inc. All Rights Reserved
………………...………………………………..……………...Troubleshooting 8-5
Step Possible Cause If . . .
12a Is there 12Vdc between bottom terminal of
circuit breaker (red wire) and nearby ground
source (black wire)?

Yes, replace circuit breaker.

No, go to Step 13.
13
Is there 12Vdc between “ACC” (red wire) of
ignition switch and nearby ground source
(black wire)? 
Yes, check for loose or broken wires
between “ACC” of ignition switch and
bottom terminal of circuit breaker.

No, go to Step 13a.
13a
Is there 12Vdc between “B” (blue wire) of
ignition switch and nearby ground source
(black wire)?

Yes, replace ignition switch.

No, go to Step 14.
14 Is there 12Vdc between blue wire on starter
solenoid and nearby ground source (black
wire or bare metal on engine case)?

Yes, check for loose or broken wire
between starter solenoid and ignition
switch.

No, go to Step 14a.
14a Check connections and condition of red
battery cable

Yes, there should be 12Vdc at all previous
steps.

No, replace battery cable.
Table 8-6 Burner Electrical Troubleshooting (continued)