Crafco 56900, Руководство по эксплуатации и обслуживанию

Страница: 17 / 38

17
CAUTION
Extreme care must be used when operating this equipment. Safety is the result of being
careful and paying attention to details. Certain exposed parts of this machine, when
operating, reach 500°F.; the material as high as 400°F. and the hydraulic fluid may reach
200°F.
Always wear protective clothing and eye protection. Be sure that all joints and
fittings are tight and leak-proof. Immediately replace any hose which show signs of wear,
fraying or splitting. Tighten all bolts, nuts and screws every 100 hours.
SHUTDOWN PROCEDURE
1. We highly recommend emptying all, if not most of the material before shutting down
the machine. It will result in faster start up times in the morning, help keep the
aggregate from settling at the bottom, and offer better material performance by using
fresh material.
2. Turn burner toggle switch to “OFF.”
3. Return mixer hydraulic control switch to “OFF” position.
4. Turn off engine by turning off the key.
STORING MACHINE
The Patcher I should be stored in an area where moisture cannot enter machine.
Extended down time can cause moisture build up in the heating oil tank.
If there is any suspicion that moisture that may have collected in the heat transfer
oil, warm the heat transfer oil to 300°F. for 2 to 3 hours to evaporate the moisture.