CRADLEPOINT
MBR1400| USER MANUAL Firmware ver. 3.5.0
© 2012
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 143
destination is defined by traffic flow. Leave these blank to include all IP addresses (such as if your rule is defined by a
particular port instead).
EXAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmask for the guest LAN
here
(leaving the last slot ―0‖ to allow for any user attached to the guest network):
Source IP Address:
192.168.10.0
Source Netmask:
255.255.255.0
Destination Port(s):
Enter a port number between 1 and 65535. To enter a single port number, input the number into the
left box. To enter a range of ports, fill in both boxes separated by the colon. For example "80:90" would represent all ports
between 80 and 90 including 80 and 90 themselves.
Failover:
(Default: Selected.) When this is selected and traffic from the chosen WAN device for this rule is interrupted, the
router will fail over to another available WAN device. Deselect this option to restrict this traffic to only the selected WAN
interface.
WAN Binding Type:
You have several options for specifying the type of WAN interface(s) you want associated with your
rule. Designate the interface(s) by
Port
,
Manufacturer
,
Model
,
Type
,
Serial Number
,
MAC Address
, or
Unique ID
. This
selection will create a dropdown list of options to complete a sentence with
the following form: ―When ____ is ____,‖ such
as
, ―When Port is Blue Ethernet.‖ You also have the option to replace ―is‖ with ―isn‘t,‖ ―starts with,‖ ―ends with,‖ or
―contains.‖
Port:
Select from the dropdown list of possible WAN ports on the router.
o
Blue Ethernet
o
Orange Ethernet 1
o
Orange Ethernet 2
o
Orange Ethernet 3
o
Orange Ethernet 4
o
USB 1
o
USB 2
o
USB 3
o
ExpressPort 1
o
ExpressPort 2
Manufacturer:
Select from a dropdown list of attached devices.
Содержание MBR1400 Series
Страница 1: ......
