CRADLEPOINT
MBR1400| USER MANUAL Firmware ver. 3.5.0
© 2012
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 98
Source Port(s)
and/or
Destination Port(s):
Enter a port
number between 1 and 65535. To enter a single port
number, input the number into the left box. To enter a
range of ports, fill in both boxes separated by the colon.
For example "80:90" would represent all ports between 80
and 90 including 80 and 90 themselves.
Source IP Address
,
Source Netmask
,
Destination IP
Address
, and
Destination Netmask:
Specify an IP
address or range of IP addresses by combining an IP
address with a netmask for either ―source‖ or ―destination‖
(or both). Source vs. destination is defined by traffic flow.
Leave these blank to include all IP addresses (such as if
your rule is defined by a particular port instead).
EXAMPLE: If you want to associate this rule with your guest LAN, you could input the IP address and netmask for the guest LAN
here
(leaving the last slot ―0‖ to allow for any user attached to the guest network):
Source IP Address:
192.168.10.0
Source Netmask:
255.255.255.0
Click
Finish
to save this rule.
Содержание MBR1400 Series
Страница 1: ......
