CPS SVW, Руководство пользователя, Страница: 5 / 13

8 9
SVW QUICK START INSTRUCTIONS
ABBREVIATIONS ON CC220EW SCALE DISPLAY
CC220EW SCALE QUICK START INSTRUCTIONS
1.
Remove Battery Cover from SVW housing and insert the included 9V battery (ensure correct
polarity). Replace battery cover.
2.
For HVAC/R use, connect the SVW per Diagram A, B, or C.
3. Press and hold the Power button for about 2 seconds until the GREEN LED flashes.
4. MANUAL OPERATION - The SVW can now be operated “manually” by pressing the Power
button to cycle the solenoid OPEN or CLOSED, OR;
5. AUTOMATIC OPERATION
- The SVW can be operated “automatically” (see instructions starting page 10).
6.
For all procedures, reference manufacturer’s instructions for using required equipment .
DIAGRAM A (CHARGE) DIAGRAM B (RECOVER) DIAGRAM C (EVACUATE)
Selectable
Modes
SCL=
Scale (Weigh)
CHg =
Charge
rEC =
Recover
rES =
Resolution
APO =
Automatic
Power OFF
SOL = Solenoid
(SVW)
Charge
Mode
c = Charge (track-
ing) in process
F =
Final
programmed charge
achieved
Recover
Mode
t OFF: Ensure tank
NOT on scale
t ON: Place tank ON
scale
r = Recovery
(tracking) in process
o = Tank
overfilled
n =
Net gain
of one or more
tanks
Charge or
Recover
h =
Hold (pause) refrigerant tracking
Err = Scale
Malfunction
All Modes OL= Overload (Reduce load immediately)
SV =
SVW
wireless
connection to
CC220EW Scale
CC220EW SCALE QUICK START INSTRUCTIONS (Cont’d)
1.
For charge or recovery procedures, reference manufacturer’s instructions for using required
equipment .
2.
Remove scale from storage case and place on level, rigid surface.
3. Install one or two (included) 9V batteries in back of control.
4. Press to turn scale ON.
5. APO (Automatic Power Off)
. 5 minutes = default setting [you may also select 10, 15, 30, 60 mins,
or turn APO OFF]. Press until APO appears on display. Then use until desired APO
time is found. Then press to select desired time.
6.
DISPLAY RESOLUTION : Default setting is 0.2 Oz (5g).
a. To select a different resolution, press until “rES” appears on display.
b. Press arrows until new desired value found (Oz: .1, .2, .25, .50; or Grams: 2, 5, 10, 25)
c. Press to enter your selected value.
7. WEIGHT UNITS : To select Imperial (Lb & Oz) or Metric (Kg & G) units, press the key to toggle to
your desired value.
8.
You are now ready to Weigh, Charge or Recover.
Yellow
Blue
Red
IN
OUT
Yellow
Yellow
Blue
Red
IN
OUT
Yellow
Yellow
Blue
Red
IN
OUT