In this case, you need to change the channel number to others when you transmit.
4.6 Monitor
Press and hold key for longer that 2 sec. to monitor weak radio signal and
release Key to stop the monitor. The Monitor key works to skip the channel
as well during Scan or DW, if you short press it.
4.7 CTCSS / DCS
Enter MENU mode by press and hold the “MODE” button longer than 2 sec. and
select CTCSS / DCS menu by ▲ / ▼ key. CTCSS / DCS channel will be blinking.
Choose the CTCSS / DCS channel by ▲ / ▼ key and confirm it by press “PTT”.
If you choose “Tone Off”, “NO-TONE” will be displayed on the LCD.
4.8 Key Lock
Press key and ▲key at the same time to control Key Lock ON / OFF
4.9 VOX
Enter MENU mode by press and hold the “MODE” button longer than 2 sec. and
CHOOSE “VOX MODE” by ▲ / ▼ key. The VOX Hi or VOX Low or VOX Off will be
displaying on the LCD. Select VOX Hi or VOX Low or VOX Off by using ▲ / ▼ key
then confirm it by press “PTT”. “VOX ICON” will be displayed, in case you choose
the VOX on.
The VOX will be performed when external Ear/Mic. is connected only.
4.10 SCAN
Press key and
▼
key at the same time to select SCAN ON / OFF.
4.11 DW SCAN
Enter MENU mode by press and hold the “MODE” button longer than 2 sec. and
choose “DW” by ▲ / ▼ key. DC will be blinking on the LCD. Select DW channel
or DW off by ▲ / ▼ key then confirm it by press “PTT”.
4.12 LCD Back Lighting
Back lighting will be ON every key you press except “PTT” and it will be OFF after
long last 5 sec. from any key touched.
4.13 CLONE
Press Power ON and
▲
key at the same time of the host unit.
“CL---“ will be displayed on the host unit.
Press power ON and
▼
key at the same time of the sub unit.
“PR---“ will be displayed on the sub unit.
Connect the Clone cable between the host unit and the sub unit.
The program will be transferred to the sub unit automatically.
“Pass---“will be displayed on the LCD of host unit after complete of program
transfer successfully.
In case to continue the program transfer to another unit, connect the Clone cable
to another sub unit and press ”PTT” to the host unit.
“Pass---“ will be displayed on the LCD of host unit after complete of program
transfer successfully.
4. OPERATION
