3.1 Charging the Battery
1. Plug the AC adaptor into the AC power outlet.
2.
Connect the mini USB cable into the mini USB jack of the unit
3.
Charge the radio. It will take 3 to 5 hours for full charging
Or
1. Plug the USB part of mini USB cable into the P / C
2.
Connect the mini USB part of mini USB cable into the mini USB jack of the
unit
3. Charge the radio. It will take 3 to 5 hours for full charging
Or
1.
Plug the charger into 110/220V AC power outlet.
2.
Insert the battery pack into the charging tray for charging.
4.1 Power On / Off
To turn the radio on, press and hold the power on key which is on the top of the unit
longer that 2 sec. And to turn off the radio, press and hold the power on key
longer that 2 sec.
4.2 Adjusting the Radio Volume
Adjust the volume level by using ▲ / ▼ key (16 steps)
4.3 Channel Selection
Press and hold the “MODE” button longer that 2 sec. to enter the channel selection
mode. The “CH” will be blinking on the LCD. Select the channel number by using
▲ / ▼ key and press “PTT” button to confirm it. The channels will increase
constantly in case press and hold ▲ key or the channels will decrease constantly
when you press and hold▼ key.
4.4 Transmission
Press and hold the “PTT” button while speaking at about 5cm from the microphone
for transmission. Release the “PTT” button to return to stand by mode.
4.5 Reception
Select the wanted radio channel. If the CTCSS or DCS icon is blinking, it will
indicate that the sender is using as same radio channel as you set with other pilot
tone CTCSS / DCS code.
3. CHARGING THE BATTERY
4. OPERATION
