Product Safety and RF Exposure
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1
．
This device may not cause harmful interference.
2
．
This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution:
Caution: To maintain compliance with the FCC’s RF exposure guidelines hold
the transmitter and antenna at least 1 inch (2.5 centimeters) from your face
and speak in a normal voice, with the antenna pointed up and away from the
face, use only the supplied belt chip for this product and transmitting, use of
other accessories may not ensure compliance with FCC RF exposure
guidelines.
This equipment complies with FCC radiation exposure limits set forth for
uncontrolled environment. Unauthorized antennas, modification, or
attachments could damage the transmitter and may violate FCC regulations.
The device is authorized to operate at a duty factor not to exceed 50%.
Hazardous Environments:
Do not operate the communicator in hazardous environments, explosion or fire
may result. Do not operate the communicator near unshielded electrical
blasting caps.
Under certain conditions, radios can interfere with blasting operations and may
cause an explosion. Turn your radio to the OFF position to prevent accidental
transmission when in a blasting area or in areas posted: “Turn off two-way
radios.” Construction crews often use remote control RF devices to set off
explosives.
Never use cleaners or solvents to clean your device. Use a dry, lint-free cloth
to clean the battery contacts. Do not submerge the unit in water.
NOTE
: CPS Telecom Limited is not responsible for any changes or
modifications not expressly approved by the party responsible for compliance.
Such modifications could void the user’s authority to operate the equipment.
The devices must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes
with the product.
