E-Mail: [email protected] - Internet: www.cpn.de
2
Contents
Preliminary note
............................................................................................................................ 3
Safety Instructions
........................................................................................................................ 3
Terminology and Abbreviations
.................................................................................................. 3
Required Tools
............................................................................................................................... 3
Technical overview
....................................................................................................................... 4
1.
Mount the CPN Enclosure to the pole
................................................................................ 5
2.
Mount the solar panel to the pole
....................................................................................... 6
3.
Mount the antenna to the pole
............................................................................................ 7
4.
Mount the IDP-Terminal to the pole
................................................................................... 8
5.
Open the CPN Enclosure
...................................................................................................... 9
6.
Ensure all circuit breakers are switched off / not plugged in
....................................... 10
7.
Remove the top of the battery-mount
............................................................................. 11
8.
Insert the battery into the Enclosure
............................................................................... 12
9.
Connect the battery to the Enclosure
............................................................................... 13
10.
Connect the solar panel cables to the Enclosure
............................................................ 14
11.
Connect both sides of the solar panel
.............................................................................. 15
12.
Insert the cable of the IDP and connect it
...................................................................... 16
13.
Insert the antenna cable and connect it
.......................................................................... 17
14.
Switch on / plug in all circuit breakers inside the Enclosure
........................................ 18
15.
Check if the system is operating properly
....................................................................... 19
16.
Close the CPN Enclosure
.................................................................................................... 20
Any questions or suggestions?
................................................................................................. 21
