E-Mail: [email protected] - Internet: www.cpn.de
16
12.
Insert the cable of the IDP and connect it
Insert the cable coming from the IDP terminal (DCE) into the Enclosure and connect it to the terminal
blocks marked from
#5
to
#8
. Connect the wires as following:
#5
#6
#7
#8
ST-6100
Red (+ PWR)
Black (- GND)
Yellow (RX)
Orange (TX)
ST-2100
Grey (+ PWR)
Brown (- GND)
Yellow (RX)
Green (TX)
Make sure that all circuit breakers are switched to OFF during installation!
