CPI TRML Series, Инструкция по эксплуатации

Страница: 17 / 47

TRML R
EMOTE
C
ONTROL
C
ONSOLE
17
JU6 In Increases deskmic, panel / gooseneck audio
JU7 In
JU8 Out
JU9 In
* Table 4 lists the solder jumpers located on the base board. Jumpers are considered to be “in” when solder has
been applied to form a short across the two solder pads. Jumpers are considered “out” when no solder has been
applied or when solder has been removed to form an open across the two solder pads.
**
Base board solder jumpers are listed to show factory settings and are not to be changed. Any jumper changes
will disable the unit from operating correctly.
Table 5 - Solder Jumper Settings - Top Board
JUMPER IN OUT
JU1 Reserved for future applications Reserved for future applications
JU2 Disables off-hook monitor burst tone Enables off-hook monitor burst tone
JU3 Pr9Vdc at JP1-1 (opt. encoder V+) R9Vdc at JP1-1 (opt. encoder V+)
JU4 Pr18Vdc at JP1-1 (opt. encoder V+) R18Vdc at JP1-1 (opt. encoder V+)
JU5 Reserved for future applications Reserved for future applications
* Table 5 lists the solder jumpers located on the top board. Jumpers are considered to be “in” when solder has
been applied to form a short across the two solder pads. Jumpers are considered “out” when no solder has been
applied or when solder has been removed to form an open across the two solder pads.
A
UDIO
C
ONTROLS
The TRML series remotes have a number of potentiometers. Following are tables indicating the pot designation,
control, and location. Audio controls are provided below for quick reference. Note that some controls can or will
effect other settings. Pictorial of locations can be found on page 20.
Table 6 - Line Audio Controls - Middle Board
Audio Controls
POT CONTROL DESCRIPTION NOTE:
R125 Line 1 Tx Adjusts Line 1 Tx audio level
R142 Line 2 Tx Adjusts Line 2 Tx audio level
R104 Line 3 Tx Adjusts Line 3 Tx audio level
R85 Line 4 Tx Adjusts Line 4 Tx audio level
R154 Line 1 Rx Adjusts Line 1 Rx audio level
R159 Line 2 Rx Adjusts Line 2 Rx audio level
R174 Line 3 Rx Adjusts Line 3 Rx audio level
R155 Line 4 Rx Adjusts Line 4 Rx audio level
* Table 6 lists the audio controls located on the middle board. Top housing must be removed to gain access.
Table 7 - Audio Controls - Base Board
POT CONTROL DESCRIPTION NOTE:
R63 Tx Mod Out Adjusts overall Tx audio Effects all lines
R75 Mic Level Adjusts mic levels Effects all mics and all lines
R80 Tone Level Adjusts control tones Effects all lines
R96 Earpiece Level Adjusts earpiece audio Effects Select & Unselect audio
* Table 7 lists the audio controls located on the base board and accessible the bottom of the remote (except R80).