CPI TRML Series, Инструкция по эксплуатации

Страница: 7 / 47

TRML R
EMOTE
C
ONTROL
C
ONSOLE
7
SELECT ALL Button: Allows user to select multiple lines to transmit on. Once the button has been pressed, a
green LED shows the Select All function has been activated and the user can now select and unselect desired lines
using the LINE1-LINE4 buttons. The last selected line
before entering into the Select All mode is still controlled by
the Selected Volume control and the other lines are controlled by the unselected volume control.
PRIVACY Button: Non operational. Reserved for future applications.
INTERCOM Button: When pressed and held, provides intercom capability to other parallel remotes on the selected
line(s) without keying the radio. A yellow LED will light as long as the intercom button is pressed.
MONITOR Button: Sends the monitor tone burst, on the selected line, placing the radio into monitor mode to
disable coded squelch (CTCSS/CDCSS) so the line may be monitored before transmitting. A green LED lights as
long as the monitor button is pressed.
TX Button: When pressed and held, allows the user to key the radio and transmit on selected lines. A red TX LED
lights as long as the button is pressed. The TX LED also lights when any PTT occurs from the TRML and will also
light as a parallel transmit indication (PTI) that parallel remotes on the selected line are currently transmitting.
SEL Volume Control: Adjusts the speaker level of the Selected audio when the remote is set to control volumes
independently or adjusts the speaker level of the summed Selected and Unselected audio when the remote is set
to control both.
UNSEL Volume Control: Adjusts the speaker level of the Unselected audio.
Programming Display: Non operational. Reserved for future applications.