CPI T02KO, Руководство по установке и эксплуатации

Страница: 101 / 122

KA BAND OUTDOOR TWT AMPLIFIER
B.2.4.1 Auto Update
The software automatically checks the amplifier meter log for changes at a frequency of once
per second. Adjusting the Auto Log Time can change this value (see section B.2.4.2). If a
change is detected then the amplifier refreshes the display with the new data. Clearing the
Auto Update check box will disable this feature.
B.2.4.2 Auto Log Time
The amplifier stores an entry in the meter log anytime an event occurs. During normal
operation events may occur infrequently. Setting the
Auto Log Time to a value other than
0.0M will cause the PA to automatically log an entry at the specified interval (ex. 0.5M=log
every 30 seconds).
B.2.4.3 Search
The Search feature is used to quickly search through the meter log for a specific type of event
such as a fault or alarm. To use the search feature the entire meter log must be downloaded
from the amplifier. This is accomplished by first clearing the
Auto Update check box then
pressing the Update All button.
Once the meter log is downloaded select an event using the Event edit box. Use the up/down
arrow buttons to the right of the Event edit box to search for the selected event.
B.2.4.4 Save File
Save File saves the meter log to a tab delimited text file, which can be accessed using a
program such as notepad. Readings and settings are placed at the end of the file.
Press the
Save File button. The save log range dialog box will appear. Select the range of log-
entries to be saved.
D
OC
.01031492 R
EV
.3
B-9