CPcam 262Z, Руководство пользователя, Страница: 9 / 71

FRONT AND REAR PANELS
-5-
In the sub-layer of the advanced setting menu,
press this button to confirm the settings and go back to the upper layer.
10) ENTER
Confirm the password entering.
Under the advanced menu, use this button to confirm the settings and go back to the upper layer.
11) EJECT /
Press this button to open / close the DVD-RW drive.
12) SLOW
Under the playback mode, press “SLOW” button or “SHIFT + SLOW” buttons to slowly playback the recorded file
(by 1/4 speed or 1/8 speed).
13) ZOOM
Press this button to enlarge the image of the selected channel.
14) AUDIO
Press “SLOW + ZOOM” buttons or “SHIFT + AUDIO” buttons to select the live or playback sound of the audio
channels.
Icon “ ” means: Live audio of the 1
st
audio channel / Icon “ ” means: Playback audio of the 1
st
audio channel
Icon “ ” means: Live audio of the 2
nd
audio channel / Icon “ ” means: Playback audio of the 2
nd
audio channel
Icon “ ” means: Live audio of the 3
rd
audio channel / Icon “ ” means: Playback audio of the 3
rd
audio channel
Icon “ ” means: Live audio of the 4
th
audio channel / Icon “ ” means: Playback audio of the 4
th
audio channel
Icon “ ” means: The audio channel is not selected.
/ 0 1 1 0
0
2-%* 34%* "+ %*2 %*$ %*5 %*.
15) SEQ (Sequence)
Press “SEQ” button or “SHIFT + SEQ” buttons the DVR will enter full screen sequence mode. Press again to exit
the sequence mode.
16)
16CH: Press this button to show the 4 / 9 / 16 channel display modes.
8CH: Press this button to show the 4 / 9 channel display modes.
17) PTZ
Press “SEQ + ” buttons or “ + ” buttons at the same time to enter / exit the PTZ control mode.
In the PTZ control mode (Indicated by the icon “ ”):
Zoom in: Press " " button ; Zoom out: Press " " button
Adjust PTZ angle: Press "UP”, “DOWN”, “LEFT” or “RIGHT" buttons
18) (PAUSE/UP/ +), (REW/LEFT), (FF/RIGHT), (STOP/DOWN/ -)
Press one of these direction buttons to move the cursor up/down/left/right.
Under the DVR menu mode, these direction buttons can use for the following operation:
: Make the selection / Change the settings.
: Go to the upper layer or sub-layer / Make the selection.
Under the playback mode, press these buttons to pause / stop / fast rewind / fast forward the playback file.