CONNECTIONS AND SETUP
-8-
! " # $% &
3.1 HDD Installation
The HDDs must be installed before the DVR is turned on.
Step 1: Loose the screws on the upper cover and open the upper cover of the DVR.
Step 2: Screw out the HDD bracket.
Step 3: Get a suitable brand HDD and set the HDD mode (
Master
).
Step 4: Align the screw holes of the bracket with the HDD’s screw holes. Screw the HDD onto the HDD bracket.
Step 5: Screw the HDD bracket back to the DVR base.
Step 6: Connect the HDD to the power connector and IDE BUS (make sure to align the HDD precisely for pin
connection).
Step 7: Close the upper cover of the DVR, and fasten all the screws you loosened in Step 1.
3.2 Camera Connection
The cameras must be connected and power-supplied before the DVR is turned on. Connect the camera with the
indicated power supply. And then connect the camera video output to the DVR video input port with a coaxial cable or
RCA lines with BNC connectors (
The DVR will automatically detect the video system of the camera
).
"+
7
$ $
,
-
0
/
0
1
1
0
0
2-%* 34%* "+
%*2 %*$ %*5
%*.
.%* "+
%*2
Содержание 262Z
Страница 7: ...OVERVIEW 3...
Страница 28: ...ADVANCED MENU 24...
Страница 37: ...ADVANCED MENU 33...