5-6: Guidance of change the counting sensor of rolling motor.
A: Detach the rear cover of backrest. Then we can find counting sensor of rolling motor.( Refer
to
Guidance of detach front cover & rear cover.
)
B:
Use diagonal cutter get ride of the cable ties which fasten the mechanism wires.
C: Use diagonal cutter peel the heat-shrinkable T bush slowly. ( As picture below show.)
Locate counting sensor of rolling
motor.
Locate cable ties.
Cable tie has been
taken off.
Be careful, don’t
cut the wire
Heat-shrinkable T bush has been
peel off.
